What if no card reader is in the pc? How to get one and install it on the pc?

Photography is one of the most wonderful ways through which you can get to keep your most adored memories through the ages. If you are a fan of taking photos or you are doing it as your profession, you do not have to struggle much looking for photography accessories such as camera, memory card, memory card reader, battery among others. Amazon offers you with the best online store. You can visit different stores owned by Amazon and pick a photography product which will you help improve the quality of the photos that you take. In addition to that, Amazon offers you the best guidance on how to use its products. Below is guidance on how to get and install a card reader on a PC.

Just in case you are the type who hates the stuffs that will make you keep on plugging and unplugging the USB, then you need an internal memory card for your PC. To install it, the first thing to do is to remove the case from your PC. After that, you will be required to take a wire and attach it to USB header that is found on the motherboard of your PC. This is if your PC has one. There are other PCs that have been designed with their motherboard at the back. This will then force you to look into the manual that came with the motherboard so that you can get the guidance on how to go and put the USB installation.

Some of the readers have USB cables that are found on the back. The cables can be used for the purpose of attaching the USB header to your mother board. You will also be required to remove the 3.5 inch blanking plate. The next step will be to screw the memory card reader into the slot so that you can attach the cable to the mother board.

You just have to restart your computer to detect the card reader just in case you connect it to the serial port reader. No prompting of the user will be required as the installation will take place automatically if the device driver is already available. This normally takes a few minutes.  If it is not available, add hardware wizard will start. You will simply be required to follow the instructions for the installation of the software.

One of the things that are of great importance to note is that the smart card reader comes with the setup instructions from its manufacturer. Just in case the manufacturer has provided the instructions for setup, make sure you use them.

2014-05-08T15:37:49+00:00